No need to buy
another car.
A tired engine is a reason to rebuild it, not to replace the car. We overhaul and rebuild your own engine — stripped to the block, machined back to factory spec at Standard Automobile Engineering, and reassembled with genuine parts. Photo updates at every stage, and a guarantee in writing.
Send your car's model, year and problem — voice notes welcome. Or call 0333-6229700

Gaaribaan at a glance
- What we do
- Rebuild your own engine — never an engine swap
- Who machines it
- Standard Automobile Engineering, Samsani Road, Lahore
- Estimated cost
- PKR 50,000 – 1,00,000 by engine, plus about PKR 15,000 mechanic labour (workshop estimates, Oct 2026)
- Time
- Usually 4–5 days
- Guarantee
- 6 months or 10,000 km, whichever comes first — in writing
- Hours
- Mon – Sat · 10am – 8pm · Friday prayer break 1 – 3pm · Sunday closed
- 0310-4538244
- Call (workshop)
- 0333-6229700
Engine overhaul and rebuilding, with proof you can see
Fake parts sold as genuine, hidden markups, swapped components, endless delays. Gaaribaan replaces zabaani trust with photos, receipts and a written guarantee.
Genuine parts, proven
Riken/NPR rings, genuine bearings and gaskets, and we share the actual purchase receipts with you.
Direct workshop partnership
Precision machining is done by Standard Automobile Engineering. Your quote separates machining, parts and labour so you can see what you are paying for.
Your old parts, back on request
We photograph the parts as they come out and send you the photos on WhatsApp. Your old parts are returned on request.
A real guarantee
6 months or 10,000 km, whichever comes first. If the same covered fault returns, we redo it free — and if we can't fix it, we refund your labour and service fee.
A real rebuild — not a tune, not an engine swap
Every engine is stripped to the bare block and rebuilt to factory tolerances at Standard Automobile Engineering. Here's what a rebuild can include; your itemized quote shows what your engine needs.
Precision machining
- Cylinder boring & honing to size
- Crankshaft grinding & polishing
- Block deck resurfacing
- Valve seat cutting & head skimming
- Con-rod reconditioning & line boring
Genuine parts fitted
- Pistons & rings (Riken / NPR)
- Main & connecting-rod bearings
- Full gasket & oil-seal set
- Valves, guides & valve springs
- Oil pump, water pump & thermostat
- Timing belt / chain kit
Assembly & QC
- Bearing clearances set with Plastigauge
- Every bolt torqued to spec
- Rotating assembly balanced
- Supervised run-in & warm-up
- Oil-pressure & leak-down test
- Final road test & written report
Engines we overhaul and rebuild
* Estimated prices from the workshop for machining and genuine parts, checked October 2026. Mechanic labour of about PKR 15,000 is extra. Final scope and price are confirmed after inspection, before work starts. Electrical faults, sensors and other non-engine work aren't part of an engine rebuild. Model years and engine variants differ — send your car model, year and engine details for an itemized quote.
All prices, what's included and what changes the price →
Signs your engine needs help
Another car, or your own engine?
Use the estimated prices to help you decide. Enter the extra cash you would need to replace your car after selling it.
Six steps you can watch happen
From your doorstep to a properly rebuilt engine — with our precision partner doing the heavy engineering.
Booking & pickup
Send a WhatsApp voice note or photos. Within about 5–10 km of the workshop, we collect the car from your door for free; from farther away, ask us.
Inspection & itemized quote
A full inspection with photos of your car's condition. You approve an itemized quote line by line and can decline any item.
Teardown, photographed
We photograph the parts as they come out and send you the photos on WhatsApp. Your old parts come back to you on request.
Precision machining @ Standard Automobile Engineering
Crankshaft grinding, cylinder sleeve boring, deck resurfacing and head refacing — with before/after micrometer readings.
Assembly & QC torque-logged
Reassembled with genuine parts, torque specs logged per bolt, then run in, leak-checked and road-tested.
Delivery & guarantee
Washed and returned with your warranty card — free drop-off within about 5–10 km of the workshop.
Your rebuild, documented on WhatsApp
We send photos and progress updates on WhatsApp as your own engine is rebuilt. These are the stages of the process, from booking through handover and guarantee support.
The 11-stage rebuilding process
Process overview · Updates arrive on WhatsApp
- Booking
- Pickup
- Inspection
- Quote approval
- Teardown photos
- Precision machining
- Genuine parts sourcing
- Assembly
- Quality checks & road test
- Delivery
- Guarantee support
Precision at the Samsani Road workshop
Not stock photos. This is a real 3-cylinder overhaul — a coolant-eaten block being brought back to spec.






Honda Civic, D17 engine: block deck and cylinder head resurfaced
Drag each slider to compare the same parts before and after machining. Real photos from the workshop, only cropped and aligned, not retouched.




Machined at Standard Automobile Engineering, Samsani Road, Lahore.
Built for the car you can't let go of
Illustrative examples — not real customers.
Rizwan
His 2012 Mehran raised the kids. Can't afford new, won't sell it.
Bilal
First car, a used Corolla. Wants the engine fixed properly, not patched.
Ayesha
Needs the family WagonR safe and reliable — and hates being overcharged at a workshop.
Kashif
His Alto is his income. Every day off the road is money lost.
A rebuild quote you can check, line by line
Compare the scope as well as the total. Machining, parts, labour and guarantee terms should be clear before you decide.
Before you choose a rebuild
- Which machining operations does this engine need?
- Which parts and brands are included in the quote?
- What is covered, for how long, and on what terms?
Gaaribaan
- Precision machining at Standard Automobile Engineering
- Genuine parts, with purchase receipts shared
- Written guarantee, agreed timeline, WhatsApp photo updates
Your rebuilding guarantee, in writing
A guarantee only means something if it's specific. Here's ours, in plain words.
6 months / 10,000 km
Every engine rebuild is covered for 6 months or 10,000 km — whichever comes first — on the parts and labour we supplied.
Same fault again? We redo it free
If the same covered fault returns within the guarantee period, we fix it again at no cost, with free pickup within about 5–10 km of the workshop. No arguments, no “thora aur paisa lagega”.
Unresolved fault? Labour and service fee refund
If we genuinely can't resolve the covered fault, we refund your labour and service fee.
Your guarantee is written on your warranty card in plain terms, so you know exactly what is covered.
Trust you can check yourself
We're new to the web — but not to engines. Everything we claim, you can verify before you commit.
See us on Google
Our partner workshop, Standard Automobile Engineering, has a verified Google listing. Read the reviews there — and leave yours after your job.
Open the workshop's Google profile ›40 years at the lathe
Every engine is machined at Standard Automobile Engineering — four decades of family crankshaft, boring and cylinder-head work in Lahore.
A real address you can visit
No faceless page. Visit the workshop on Samsani Road, watch the machining happen, and meet the engineer working on your car.
See the workshop ›After your job, please leave an honest review on the workshop's Google profile.
Aap ke sawal, saaf jawab
Straight answers to what every customer asks before they trust a workshop.
Do you fit a different (Kabli) engine, or rebuild mine?
How much does an engine overhaul or rebuild cost in Lahore?
Do you do engine reboring?
My engine has failed: sell the car, fit a Kabli engine, or rebuild mine?
What should an engine rebuilding quote include?
How do I know the parts are genuine?
What exactly is the guarantee?
How long does an engine overhaul take?
Will my parts be swapped or stolen?
Do you work on my car?
How much do I pay, and when?
Do you pick up my car?
Where is the workshop?

Powered by Standard Automobile Engineering
Gaaribaan coordinates your rebuild end to end and stands behind the written guarantee. Precision engineering is carried out by Standard Automobile Engineering on Samsani Road, Lahore — Haji Shafique Ahmed and M. Hassaan Shafique, with 40 years of family workshop experience.
Come see the workshop
A real address you can stand in front of, and a workshop you can walk into.
Please call before you come, so the right person is there.

Let's bring it back to life
Tell us about your car. We'll reply on WhatsApp with an estimated price and the next step — inspection at the workshop is free.
Opens WhatsApp with your details pre-filled. No spam, ever.